TECH — Toyota

When power to the window motor has been interrupted it may be necessary to reset the power window switch. With the car on, push down on the window switch till the window is fully open. Make sure to hold the switch down for at least 2 seconds after the window has fully opened. You may hear a small tick noise. Pull up on the window switch till the window is fully closed and hold again for 2 seconds. If the reset has been successful, One-Touch Auto Up & Down should now be operational. If installing a used motor or the...

Only the 2 thickest wires are required for power. Red & Green.

1. Cut the Red & Green wires 2cm away from the old plug. The old plug will not be used.
2. Attach Red to Red & Green to Black using connectors/crimps.