Home page
Select Your Vehicle
About Us
Blog Posts
Contact Us
Reviews
FAQ
Returns
Store Policies
Trade Account
Tech / DIY
Reset Procedures
Using Scotch-Locks for Wiring
Using Scotch-Lock Connectors for Window Motor Wiring
Need to connect a replacement motor without cutting your car's original wiring? T-Tap Scotch-Lock connectors let you tap into the power wires cleanly and quickly.
Scotch-Lock connectors allow you to make a connection without altering the car's original wiring. This method can also be used to connect a 2-wire motor to a 6-wire plug.
This method removes the auto-function. The window will only operate while holding the button ā one-touch auto-up/down will no longer work.
Identify the two power wires coming from the original plug on the car. In a 6-wire plug, the power wires are typically the two thickest wires.
Close the T-Tap connectors over the two power wires using pliers. The connector pierces the insulation and makes contact with the wire inside ā no cutting required.
Push the motor's leads onto the connectors. Note: Black is negative from the motor. A trace or stripe on the car's wiring typically indicates the negative wire.
Test the connection using the car's switch ā confirm up is up and down is down. If reversed, unplug the motor and swap the connectors around.
Once the correct connection is confirmed, tape and immobilise the connectors to ensure longevity and prevent movement over time.
We stock direct-fit replacement motors for a wide range of makes and models.
š Related Guides
Find Your Replacement Motor
Brand new, bench-tested, and backed by warranty. Same-day dispatch on orders placed before 1 PM AEST.
Need help with the wiring? Call us on 0410 913 385 or visit our Contact Page ā we're happy to assist.